13.6 SADEV FACTORY REBUILD
• The gearboxes are delivered plumbed and numbered.
• SADEV will adopt a careful attitude when receiving a gearbox without any ‘SADEV ‘seals. This will
also be valid if the gearbox shows minor or major damages.
13.6.1 Returning Gearboxes For Servicing
At the time the gearboxes return to SADEV, follow the Receiving procedure as described below:
• Gear box drained and cleaned.
• Release bearing in place
• Oil pump in place.
• Lubrication ports closed with the proper plugs.
• Shifters and reverse gears locking, in place.
• Drain plug and drain plug seal in place.
• Differential in place
• A card specifying the kilometers of the special stages and road stages since the last service,
available at the end of the technical manual.
13.7 SERVICE PLANNING
The service plan of the gearbox is based on SADEV experiences. The information given about service plan
can be updated in the near future.
To Next Page
