3.6.3.3 Page #3: Logger page
This page contains the channels logged by the data systems and allows to check the zero procedure.
all the channels are set to zero when ACK button is pressed longer than 1 second.
• FL Shock: Front Left damper position [mm].
• FR Shock: Front Right damper position [mm]
• RL Shock: Rear Left damper position [mm]
• RR Shock: Rear Right damper position [mm]
• FL Speed: Front Left wheel speed [km/h]
• FR Speed: Front Right wheel speed [km/h]
• Steer Angle: Steering wheel position [deg]
• Acc X: longitudinal acceleration [mg] from external accelerometer
• Acc Y: lateral acceleration [mg] from external accelerometer
All the listed channels except wheel speeds are set to zero when ACK button is pressed longer than 1 second.
Damper position sensors and external accelerometer are optional parts. Please refer to the T-421 Spare parts
catalogue.
To Next Page
