Tatuus T-421 - Crown Wheel and Differential Bearings Replacement

RELEASE 2.1.0
164
13.11.10 Crown wheel and differential bearings replacement
• Remove the bearings (extractor needed)
○
1 .
• Untighten the M10x1.00 bolts
○
2 (heat if necessary). Remove the crown wheel
○
3
• Remove the EKAGRIP wedge
○
4 .
• Clean and degrease the wheel crown, use an M10 x 1.0 tap drill.
• Refit the wheel crown, the new EKAGRIP wedge, use new bolts (loctite 648, torque 90 N.m).
• Assemble the bearings.
1
1
2
3
4