Tatuus T-421 - Camber Adjustment

RELEASE 2.1.0
96
5.3.2 Camber adjustment
Front camber is set changing the shims stack between Ackermann and the upright:
Camber
adjustment
Front
Rear
Camber change
Camber change
+1 mm
+0.42 deg (+25’)
+0.3 deg (+18’)
Max camber shim
13 mm
11 mm
Min camber shim
0 mm
0 mm
Warning:
After any camber settings, check the proper tightening of the nuts and ensure the correct clamping of the
Ackermann on the upright.
GAP!