71
Problem Possible Cause Solution
The camera does
not work.
The power is off. Press the power button to
turn it on.
The battery is inserted
incorrectly.
Reload the battery
correctly.
The battery power is
low or drained.
Replace battery with a new
one or charge the
battery. See Page 12.
The image can
not be taken
when I press the
shutter release
button.
The camera is not in
capture mode.
Press the mode switch to
capture mode.
You did not press the
shutter release button
down enough.
Press the shutter release
button down fully.
The memory card is
full.
Replace with another
memory card, upload the
images to a computer or
delete the images.
The camera is still
saving the last image
you took.
Wait until image storing of
the camera is fi nished.
The fl ash is still
recharging.
Wait for a few seconds
until the recharging is
completed.
The battery power is
low.
Replace battery with a new
one or charge the
battery. See Page 12.
You did not insert a
memory card.
Insert a memory card.
The fl ash does
not fi re.
The battery power is
low.
Replace battery with a new
one or charge the
battery. See Page 12.
The fl ash is off. Switch to other fl ash mode.
Trouble Shooting
To Next Page
Loading...