73
When ... Solution
Date/Time has
been lost. Please
reset it
The system detects that
the camera has lost
date/time after you turn
it on.
Reset the date/time. See
page 60.
Card locked! Memory card is locked. Slide the switch on the
memory card to unlock.
Change battery! Battery is empty. It will
turn off automatically
after 2 seconds.
Replace battery with a
new one or charge the
battery. See Page 12.
Memory full!
(Card full!)
There is insuffi cient room
to save more images in
internal memory or on the
memory card that is
inserted.
Replace another memory
card or erase unwanted
images. Before erasing,
upload all the images to a
computer.
Memory error!
(Card error!)
Some problem occurred
with the memory card or
internal memory.
Turn off the camera.
Remove and then insert
the memory card again.
If the same message
appears, format the
memory. See page 64.
No image There are no images
recorded in internal
memory or on the
memory card.
---
Image protected
(All images
protected).
You attempted to erase
the protected images.
You have to remove the
protection fi rst and then
delete it.
Cannot be
effected
The function you
attempted to perform
can not be effected for
the selected image was
in playback mode.
---
Warning Indicators and Messages
To Next Page
Loading...