Commands
5-30
TDS5000B Series Service Manual
DIAg:RESults?
DIAg:RESults:VERBose?
DIAg:RESults:VERBose?
This query might return
:DIAG:RESULTS:VERBOSE “DIAG ABORTED, ERROR 15 in A2D-Dmux 1
interconnects”
DIAg:SELect:ALL
This command (no query form) selects all available diagnostics. This command
is equivalent to selecting Instrument Di agnostics from the Utilities menu, and
then choosing ALL from the Subsystem, Area and Test pull-down lists.
DIAg:NAMe:AREA?, DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST?,
DIAg:EXECUTE
DIAg:SELect:ALL ALL
DIAg:SELect:ALL ALL
This command selects all available diagnostics.
DIAg:SELect:AREA
This command (no query form) selects one of the available areas. This command
is equivalent to selecting Instrument Di agnostics from the Utilities menu, and
then choosing an Area from t he pull-down lists.
NOTE. This command should only be executed if DIAg:LEVEL is set to AREA.
DIAg:SELect:SUBSYS?, DIAg:SELect:TEST?, DIAg:SELect:LAST
DIAg:SELect:AREA <NR1>
Related Commands
Syntax
Example
Related Commands
Syntax
Example
Related Commands
Syntax
To Next Page
Loading...
