SAFETY AND SECURITY PRECAUTIONS
CHAPTER 2
10
ECOTEL 3G 16.1. Revised: 1 March 2011.
2 SAFETY AND SECURITY PRECAUTIONS
Please be sure and take time to read this section to ensure your personal safety and proper operation of your gate-
way.
To avoid personal injury or damage to the system, please follow all safety instructions before you begin working
on your gateway.
ECOTELs are CE certified and fulfill all relevant security requirements. The manufacturer assumes no liability for
consequential damages or for damages resulting from unauthorized changes.
2.1 SAFETY MEASURES
Danger of electric shock - the power supplies run on 230 V. Do not open the ECOTEL or its power supply.
Make sure to install the ECOTEL near the power source and that the power source is easily accessible.
Bear in mind that telephone and WAN lines are also energized and can cause electric shocks.
Be sure to respect country-specific regulations, standards or guidelines for accident prevention.
If you do not use the Ethernet cable included in the package contents, make sure you use a shielded Ethernet cable.
2.2 POWER SUPPLY
The included power supply is to be used exclusively for operation of your ECOTEL.
2.2.1 TECHNICAL DATA
The following list includes technical information on the power supply:
Type: GSP-1216TLS/1 for ECOTEL
Input voltage: 230V~ +/-15% 50-60Hz; 0.40A
Output voltage: 12V
---
; 1.6A
Weight: 96g
Tested and certified as per EN60950-1
Make sure you read this chapter thoroughly and save the instructions for future ref-
erence. Use only the power supply GSP-1216TLS/1 included in the package contents
of your ECOTEL.
To Next Page
Loading...