EasyManua.ls Logo

TELES ECOTEL - Night Configuration

Default Icon
247 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CONFIGURATION FILES
CHAPTER 5
57
ECOTEL 3G 16.1. Revised: 1 March 2011.
5.2.1.3 NIGHT CONFIGURATION
The sections for the time-dependent configuration changes and time-controlled routings are defined here.
A maximum of 19 additional daily configuration zones are possible (
Night1 to Night19). The entry
NightResetTime reactivates the original configuration contained in the System section.
The entry will have the following syntax:
Example: The configuration section is activated Fridays, Wednesdays and Mondays at noon unless the day
in question is a holiday:
Night2=12:00 00101010
The configuration section switches back to the default configuration (System section) every day
at 8:00 p.m:
NightResetTime=20:00 11111111
The configuration section is activated on November 5, December 24, and at noon on Mondays:
Night1=12:00 10000010
Holiday=05.11.
Holiday=24.12.
Please remember to keep track of how much memory is available on the system.
Table 5.12 pabx.cfg: Night Parameters
Night<num>=<time> <day>
<num>
Enter a value between 1 and 19 to define which configuration is to be loaded.
<time>
If there is a time set with the format hh:mm after this entry, this configuration is loaded
daily at that time on the defined day.
<day>
Use a bitmask to set the weekdays on which the configuration applies here. The day-
mask appears in the following order:
HoSaFrThWeTuMoSu.
i
i

Table of Contents

Related product manuals