TELES ECOTEL - Chapter 7 - System Maintenance and Software Update; Configuration Errors; Status and Error Messages

SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
94
ECOTEL 3G 16.1. Revised: 1 March 2011.
7 SYSTEM MAINTENANCE AND SOFTWARE
UPDATE
7.1 CONFIGURATION ERRORS
When typographical errors are made in the configuration files, an entry appears in the
protocol.log when the
configuration is activated. This entry includes the line number and its contents.
7.2 STATUS AND ERROR MESSAGES
The
protocol.log file – assigned as the file for logging the protocol in the configuration file
(
ActionLog=file) – contains information on all activities within the system. In the example below, you can see
that all activities are recorded beginning with the date and time. If functions were activated by key combinations
from terminal devices you can identify these along with the service ID.
16.05.06-11:51:31,[990]Start STATUS - TELES.VoIPBOX V11.7a (007f)
16.05.06-12:10:57,[01A]ERR: Layer1
16.05.06-12:10:58,[000]ERR: OK
16.05.06-12:10:58,[010]ERR: OK
16.05.06-12:12:06,Remote Control from IP 192.168.1.2
16.05.06-12:12:06,Remote Control: OK
16.05.06-12:12:16,Activate Configuration System
16.05.06-12:16:26,Remote Control Terminated
16.05.06-14:00:00,Activate Configuration Night2
16.05.06-14:00:00,Time Switch Operation
16.05.06-18:00:00,Activate Configuration Night3
16.05.06-18:00:00,Time Switch Operation
Table 7.1 Event Log Messages
Message NMS Definition
Status Program
[990] Start STATUS
X TELES system software and status program have been started.
System Start
[999] System-Boot
X System restarted by timer.
[999] Remote Control:
Reboot
System restarted by remote administration command.
Configuration Changes
Activate configura-
tion <num> OK
Configuration <num> successfully loaded. Initiator displayed in
next line.
Activate configura-
tion <num> failed
[<err>]
Configuration <num> could not be loaded.