CONFIGURATION FILES
CHAPTER 5
55
ECOTEL 3G 16.1. Revised: 1 March 2011.
Bypass=ON/OFF (default ON)
ON: Bypass relay is on (system controls all ports).
OFF: Bypass relay is off (ports are connected to each other as described above, regardless of whether or not the
system is running).
5.2.1.2 LOG FILES
CDRs, unconnected calls, system events, trace output and statistics can be saved into files.
The following entries are necessary to generate log files:
You can define how the log files are to be divided. There are two possiblities for saving entries into a new file:
In increments of time (twice-daily, daily, weekly, monthly)
Depending on the size of the file
You can also define a maximum number of up to 7 files to be generated.
To ensure bypass functionality, make sure this parameter is always set to
ON (default).
Table 5.10 pabx.cfg: Log File Entries
Entry Description
ActionLog=/boot/protocol.log
System events
Log=/boot/cdr.log
CDR entries
failedlog=/boot/failed.log
Unconnected calls
TraceLog=/boot/trace.log
System trace
The available internal memory is approximately 8 MB. Make sure you monitor the
available memory.
To Next Page
Loading...
