ONLINE TRAFFIC MONITOR
CHAPTER 11
198
ECOTEL 3G 16.1. Revised: 2011.
The service indicator listed in the call log and missed calls list describes the type of connection as a four digit hexa-
decimal number. The coding is conducted according to the 1TR6 standard. A few frequently used values are listed
below:
For detailed information on how to automatically divide the files (e.g. on a daily basis), please refer to the
Chapter 5.2.1.2 .
11.2.1 CALL LOG
The following entry in the
pabx.cfg configuration file activates the capability to generate CDRs in the ECOTEL:
Log=/boot/cdr.log
The cdr.log file is stored in the data directory. New entries are always added to the end of the file. The file is
open only during editing.
Each line represents an outgoing call with the following information separated by commas:
Table 11.1 1TR6 Service Indicators
Service Indicator Definition
0101 ISDN-telephony 3.1 kHz
0102 analog telephony
0103 ISDN-telephony 7 kHz
0200 Fax group 2
0202 Fax group 3
0203 Data via modem
0400 Telefax group 4
0500 SMS or BTX (64 kbps)
0700 Data transfer 64 kbps
07… Bit rate adaptation
1001 Video telephone – audio 3.1 kHz
1002 Video telephone – audio 7 kHz
1003 Video telephone – video
Table 11.2 Call Log Entries
Column Description
0
Version
To Next Page
Loading...
