TELES ECOTEL - Chapter 14 - Additional Voip Parameters; Signaling Parameters

ADDITIONAL VOIP PARAMETERS
CHAPTER 14
218
ECOTEL 3G 16.1. Revised: 2011.
14 ADDITIONAL VOIP PARAMETERS
You can enter the following additional parameters in the route.cfg to adjust the configuration for improved
communication with the VoIP peer.
14.1 SIGNALING PARAMETERS
Table 14.1 Customized Parameters: Protocol-Independent VoIP Signaling
Protocol-Independent VoIP Signaling Parameters
VoipDad=<num>
The digits/numbers defined here will appear in front of the original DAD as described for the parameter
VoipOad below. If the parameter is to be valid in only one direction, you must also set the parameter Voip-
DadIn or VoipDadOut .