TELES ECOTEL - SMTP Trace Output

SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
144
ECOTEL 3G 16.1. Revised: 1 March 2011.
All other trace output appears in detail mode in ASCII and are also translated.
7.4.7 SMTP TRACE OUTPUT
This trace option provides output for communication with the mail server that occurs when status information or
files are sent.
To activate this option, activate the section Mail in the GATE Manager. You can choose the depth of the trace
output: Error is limited to error messages; Debug provides information; Detail provides the entire packet.
Output is defined with a
m, and the port number is 99.
Sending Files or Status Information
Global message output:
<port>
Origination port for the GATE Manager connection.
g[99]:moip: <direction> <length>
Table 7.56 Remote Output
Trace Output Description
<direction>
recv
Packets received from the remote system
send Packets sent to the remote system
write Output for communication with the internal remote interface
read Output for communication from the internal remote interface
<length>
Data length in bytes.
m[99]:mail: sendmail (<length>)
Table 7.55 Remote Output (continued)
Trace Output Description