SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
145
ECOTEL 3G 16.1. Revised: 1 March 2011.
Detailed message output:
All other trace output appears in detail mode in ASCII and are also translated.
Receiving E-Mail Messages and Sending Them as SMS or USSD
The following output displays communication of an incoming SMTP connection:
Table 7.57 SMTP Output: Sending Files or Status Info
Trace Output Description
<length>
Data length in bytes.
m[99]:mail: sendmail: <Faccount> <ip address> <Taccount> <domain> <subject> <content>
Table 7.58 SMTP Output: Sending Files or Status Info
Trace Output Description
<Faccount> Sender’s e-mail account (cdr, alarm, file, etc.).
<ip address>
SMTP server’s IP address.
<Taccount>
Recipient’s e-mail account.
<domain>
Recipient’s domain.
<subject>
Content of the subject field; serial number of the sender system.
<content> Content of the message’s body.
m[99]:mail: accept: ipad=<ip address> port=
<port>
Table 7.59 SMTP Output: Receiving E-Mail and Sending as SMS or USSD
Trace Output Description
<ip address>
The SMTP peer system’s IP address.
<port> The SMTP peer system’s origination port.
To Next Page
Loading...
