ONLINE TRAFFIC MONITOR
CHAPTER 11
197
ECOTEL 3G 16.1. Revised: 2011.
11.1.3 RESETTING STATISTIC COUNTERS
The following setting in the pabx.cfg resets the statistic counters and unblocks the controller group. The following
syntax must be used:
ResetCounter=<LAIN> <hh:mm> <day>
Up to five entries for as many groups and/or times are possible. The setting <LAIN> refers to a group of mobile
controllers. Bear in mind that StatisticTimeReset must be inactive to avoid repetition.
Example: In the following example the counters will reset for LAIN group 26211 every day at midnight, for
the group 26212 only once on the first day of the month, and for 26213 each Saturday at
8:00pm:
11.2 GENERATING AND RETRIEVING CDRS
With the
Log and failedlog commands, you save CDRs and unconnected calls in the ECOTEL.
For these parameters (
Log and failedlog), a folder and file name must always be specified after the equal
sign. The function is not active (no data is recorded) until a file name is specified.
Example:
ResetCounter = 26211 00:00 11111111
ResetCounter = 26212 00:00 01.
ResetCounter = 26213 20:00 01000000
Do not configure both StatisticTimeReset and StatisticCounter together.
Log=/boot/cdr.log
failedlog=/boot/failed.log
With recording of files, system maintenance increases. You have to be sure to down-
load or delete files and ensure that there is enough disk space left on the hard drive.
i
i
To Next Page
Loading...