ECOTEL INSTALLATION
CHAPTER 4
33
ECOTEL 3G 16.1. Revised: 1 March 2011.
4.10 SELF PROVISIONING WITH NMS
With a management connection to the NMS (Network Management System), the ECOTEL
can retrieve its config-
uration files from the configured NMS. That means that custom configuration of the device occurs automatically
when the device is started. The following setting must be made in the
[System] section of the pabx.cfg:
AlarmCallback=<ip address NMS server>
RemoteCallback=<ip address NMS server> <time> <days of week + holiday>
As soon as the device is started, it connects automatically with the NMS, which uses the device’s TAG number to
send a prepared configuration. For further information on configuration of the NMS, please refer to the NMS Sys-
tems Manual.
4.11 REMOTE ACCESS AND ACCESS SECURITY
After the system has been configured and all cables are connected, remote administration and maintenance can
occur with the GATE Manager (Chapter 4.11.1 ), the GUI (Chapter 4.11.2 ), or via FTP (Chapter 4.11.3 ).
4.11.1 GATE Manager
Figure 4.8 GATE Manager
The GATE Manager administration and maintenance software offers a broad range of functions. The GATE Man-
ager is user friendly and can be customized to suit your needs.
To Next Page
Loading...