TELES ECOTEL - Page 34

ECOTEL INSTALLATION
CHAPTER 4
34
ECOTEL 3G 16.1. Revised: 1 March 2011.
The following maintenance functions are possible:
 Display system information and network element status.
 Retrieve and display configuration files.
 Restart network elements.
 Use of a trace option for checking functions and fault diagnosis. Option to use an external tool, e.g. to
display and break down trace data.
 Update the system software (firmware) and configuration tables.
 Retrieve CDRs (Call Detail Records).
 Display the current connections (status).
 Display statistical information for network elements and interfaces.
 Display the status of the interfaces.
Use the CD enclosed in your package contents to install the GATE Manager. You have to use GATE Manager ver-
sion 16.0 or later. For a detailed description of installation and implementation of the GATE Manager, please refer
to the GATE Manager and Utilities Programs Manual.
GATE Manager remote access can occur via IP. GATE Manager access via IP uses port 4444 as origination TCP port
and port 4445 as destination port. The following default value (4445) is configured in the
pabx.cfg file for the
system’s port:
In the default configuration, ISDN remote access is disabled. To configure the system so that certain data calls are
received as remote administration calls, make the following changes in the
pabx.cfg:
RemoteCode=BBB
Add the following mapping to the route.cfg:
MapAll<direct>=BBB DATA
Make the following entries in the route.cfg if the system is to handle all ISDN data calls as remote-adminis-
tration calls:
MapAll?=BBB DATA
MoipPort=4445