TELES ECOTEL - Ftp; Setting a Password for Remote Access

ECOTEL INSTALLATION
CHAPTER 4
37
ECOTEL 3G 16.1. Revised: 1 March 2011.
4.11.3 FTP
Remote access can also occur via FTP. You can use FTP to transfer configuration files. You can also carry out func-
tions and traces with raw commands. Use the username
teles and the defined password to connect to the sys-
tem with FTP.
The following entries ensure the security of your FTP access:
Once you have access to the system, you will be in the folder
/home/teles. To upload or download configura-
tion files change to the directory
/boot. To download log files, also change to the directory /boot.
The following commands can be carried out via FTP access:
If your FTP client does not support the site command, try “literal site” instead.
4.11.4 SETTING A PASSWORD FOR REMOTE ACCESS
The following entry ensures the security of your remote access. Use the mkpwd.exe tool to generate the pass-
word. You will find it on the enclosed CD in the directory
pwd.
Table 4.4 FTP Security Entries
FTP Security
FtpdPort=<port>
Defines the FTP access port (default 21).
RemotePassword=<password>
Defines the password for FTP and GATE Manager access. Please refer to Chapter 4.11.4  for instructions
on how to enter an encrypted password in the
pabx.cfg. If you do not define a password, access to the
system via GATE Manager occurs without a password, and FTP access occurs with the default password
tcs-ag.
Table 4.5 FTP Commands
Command Function
site xgboot
Boots the entire system.
site xgact
Activates the configuration.
site xgact 1-19
Activates the Night section corresponding with the number 1-19.
site xgtrace 0
Deactivates trace.
site xgtrace 1
Activates layer 2 trace.
site xgtrace 2
Activates layer 3 trace.