ECOTEL INSTALLATION
CHAPTER 4
38
ECOTEL 3G 16.1. Revised: 1 March 2011.
Start the program in a command window with the entry mkpwd <password>. The output shows the encrypted
password. Enter the encrypted password in the configuration file
pabx.cfg’s parameter line as follows:
When the file has been transferred to the system and the configuration has been activated, access to the system
can occur only with the password. Don’t forget to memorize the password!
If you do not define a password, access to the system via GATE Manager occurs without a password, and FTP ac-
cess occurs with the default password
tcs-ag.
RemotePassword=<crypt>
To Next Page
Loading...
