TELES ECOTEL - Number Portability Settings

CONFIGURATION FILES
CHAPTER 5
73
ECOTEL 3G 16.1. Revised: 1 March 2011.
Example:
Sending Alarm Messages via E-mail
With the appropriate configuration, you can send e-mails containing alarm messages that are written into the log
file. The sender is given as
alarm and the system’s name appears in the subject box. The text box contains the
alarm message.
The following entry in the configuration file activates this function:
5.2.3 NUMBER PORTABILITY SETTINGS
The
[NumberPortability] section includes the parameters necessary for communication with the database
server.
[Mail]
SmtpServer=172.16.0.10
MailRcpt=teles.de
MailFrom=172.16.0.100
MailRcvMax=300
MailRcptMax=50
MaxMailsToHost=2
MailToHostRetries=10
MailSendRetries=10
MailAllowedPeers=172.16.0.10
...
ActionLog=/data/protocol.log daily 1000 5 @<e-mail account>
...
You must restart the system after making changes to activate the settings.
MNPQAddress=<ip addr>
Enter the IP address to which the number portability query is to be sent. The service comes from an external
provider. It is also used as the iMNP address if the parameter
MNPQSum=Yes is set.
MNPQPort=<port>
Enter the port to which the number portability query is to be sent.
MNPQAddress2=<ip addr>
Enter the IP address to which the second number portability query is to be sent when
! appears in the map-
ping entry. A second database will then be queried, for example if the first on is not online.
MNPQPort2=<port>
Enter the port to which the second number portability query is to be sent.
i
i