SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
130
ECOTEL 3G 16.1. Revised: 1 March 2011.
The trace output is as follows when the message type is not translated or is ignored:
Depending on the system control message type, one of the following message IDs appear:
h245<dir>(<tt>) cr <cr> unknown msg <hmt> <hmi>
Table 7.40 H.245 Parameters
Trace Output Description
hmt
The H.245 message type (multimedia system control message type), (Table 7.41).
hmi
The H.245 message ID (see Table 7.42, Table 7.43, Table 7.44, Table 7.45).
Table 7.41 Multimedia System Control Message Types
ID Message
0 (Table 7.42) Request
1 (Table 7.43) Response
2 (Table 7.44) Command
3 (Table 7.45) Indication
Table 7.42 Message IDs for Request Message
ID Message
0
NonStandard
1
MasterSlaveDetermination
2
TerminalCapabilitySet
3
OpenLogicalChannel
4
CloseLogicalChannel
5
RequestChannelClose
6
MultiplexEntrySend
7
RequestMultiplexEntry
To Next Page
Loading...
