TELES ECOTEL - App Trace Output; MID Trace Output

SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
111
ECOTEL 3G 16.1. Revised: 1 March 2011.
7.4.3.3 APP TRACE OUTPUT
The application output
app provides important information about the connection process.
7.4.3.4 MID TRACE OUTPUT
mid traces are intended for monitoring the state of the physical layer and are described in Table 7.12.
Example: In the following example, the digit 0 has been dialed:
Table 7.11 app Trace Output
Trace Output Description
CONN_IND
Connect indication
CONN_REQ
Connect request
CONN_ACK
Connect acknowledgment
ALRT_IND
Alert indication
CONN_CNF
Connect confirmation
CONN_RSP
Connect response
DSC_IND
Disconnect indication
DSC_REQ
disconnect request
DSC_CNF
Disconnect confirmation
info:
Dialed digit
Table 7.12 mid Trace Output
Trace Output Description
+
A-subscriber has picked up the phone.
bchan
B-channel is connected.
up ’<DTMF>’ A-subscriber has entered a digit via DTMF.
dn cif <count>
Number of impulses for each charge unit.
-
A-subscriber has hung up the phone.
[30:23.21] i[05]: midup '0'