TELES ECOTEL - SNMP Settings; Time-Controlled Configuration Settings; Configuration File Route.cfg

CONFIGURATION FILES
CHAPTER 5
74
ECOTEL 3G 16.1. Revised: 1 March 2011.
5.2.4 SNMP SETTINGS
The Simple Network Management Protocol facilitates network management and monitoring of ECOTEL network
devices and their functions. For a detailed description of SNMP configuration, please refer to Chapter 7.3.1.1 on
page 101  .
5.2.5 TIME-CONTROLLED CONFIGURATION SETTINGS
The
[Night<num>] section is reserved for prospective time-controlled configuration changes. In the
pabx.cfg file, the Night sections contain all of the system’s Subscriber entries. Simply copy all
Subscriber lines into the Night Section without making any changes.
5.3 CONFIGURATION FILE ROUTE.CFG
The system’s routing information is saved in the
route.cfg. The file contains the following sections:

[System]
 [Night<num>]
 [VoIP=<name>]
 [GateKeeper=<name>]
 [Registrar=<name>]
 [Radius=<name>]
MNPQSum=<mode>
This parameter must be activated (
Yes) if a iMNP is used.
E2EMRSAddress=<ip addr>
Enter the IP address to which the number portability query is to be sent. The service comes from an external
provider.
E2EMRSPort=<port>
Enter the port to which the number portability query is to be sent.
[NumberPortability]
MNPQAddress=172.16.0.100
MNPQPort=9003
MNPQSum=Yes
You must restart the system after making changes to activate the settings.
i
i