ECOTEL INSTALLATION
CHAPTER 4
24
ECOTEL 3G 16.1. Revised: 1 March 2011.
4 ECOTEL INSTALLATION
This section contains information on basic installation and configuration of your ECOTEL. Follow the easy instruc-
tions to set up your ECOTEL in a matter of minutes.
Implementation of individual scenarios require adjustments to the appropriate interfaces. Tips for basic settings are
described here. Links to relevant chapters are provided for more specific configuration changes.
4.1 CHECKLIST
The following checklist provides step-by-step installation instructions.
1. Check the package contents
2. Install the device
3. Connect the BRI or analog lines to the PBX and/or the PSTN
4. Check functionality (using the LEDs)
5. Using Quickstart, set the configuration (IP address and BRI / VoIP configuration)
6. Secure the LAN connection
7. Secure connection with the configuration program
4.2 PACKAGE CONTENTS
Your ECOTEL package contains the following components. Check the contents to make sure everything is complete
and undamaged. Immediately report any visible transport damages to customer service. If damage exists, do not
attempt operation without customer-service approval:
1 ECOTEL
1 power supply
1 RJ-45 LAN cable with gray connectors
1 antenna with magnetic mount
1 CD containing Quickstart, GATE Manager, system manual and default configuration files
To Next Page
Loading...