ECOTEL INSTALLATION
CHAPTER 4
36
ECOTEL 3G 16.1. Revised: 1 March 2011.
Of course, these configuration levels correspond with the most important scenarios. The passwords are saved in
the
ip.cfg in encrypted form:
PwdCarrier=<crypt>
PwdAdmin=<crypt>
PwdUser=<crypt>
Example:
The user interface is divided into the following main sections:
All of the user interface’s pages contain Help buttons and links to the online help, which provides a detailed de-
scription of all of the individual configuration settings.
[httpd]
PwdUser=k24X0sdc.uMcM
PwdAdmin=k2UMj19qtovzI
PwdCarrier=k2jryo6Xd5vN6
Never copy these entries from one system to another, as the encryption is unique for
each system.
Table 4.3 GUI: Sections
Section Description
User Data Here you can change the user passwords and the language for the HTTP in-
terface.
Faststart Faststart helps you to configure the system settings of your ECOTEL quickly
and conveniently.
System Settings IP Settings:Settings for the Ethernet interfaces and related services.
Port Settings:Settings for the ECOTELs ports.
VoIP Settings:VoIP settings for the SIP or H.323 carrier.
Telephony Routing:Routings for telephone numbers.
System Overview Overview of system information and drivers.
Commands Here you can activate a configuration or restart the system.
To Next Page
Loading...
