SYSTEM MAINTENANCE AND SOFTWARE UPDATE
CHAPTER 7
146
ECOTEL 3G 16.1. Revised: 1 March 2011.
The following output displays which packets are sent to the SMTP peer:
All other trace output appears in detail mode in ASCII and are also translated.
The following output displays which packets are received from the SMTP peer:
All other trace output appears in detail mode in ASCII and are also translated.
The following output shows that the SMTP connection is being closed:
The mail module now converts the e-mail message to the internal format and then sent as SMS or USSD. Bulk mail
(several recipient entries for the same e-mail) appear as individual messages:
m[99]:mail: mysend <<content>>
Table 7.60 SMTP Output: Receiving E-Mail and Sending as SMS or USSD
Trace Output Description
<content> Content of the transmitted packet.
m[99]:mail: recv (<length>)
Table 7.61 SMTP Output: Receiving E-Mail and Sending as SMS or USSD
Trace Output Description
<length> Data length in bytes.
m[99]:mail: terminate_session
m[99]:mail: newMail2Host r=<Taccount> f=<Faccount> s=<subject> d=<content>
Table 7.62 SMTP Output: Receiving E-Mail and Sending as SMS or USSD
Trace Output Description
<Faccount> One entry from the sender’s To field.
To Next Page
Loading...
