TELES ECOTEL - Page 16

SAFETY AND SECURITY PRECAUTIONS
CHAPTER 2
16
ECOTEL 3G 16.1. Revised: 1 March 2011.
For operation and remote administration of your ECOTEL open only the following ports only when the indicated
services are used:
Table 2.2 Default Ports Used for Specific Services
Service Protocol Port
For all systems except vGATE
FTP TCP 21 (default, can be set)
Telnet (for TELES debug access
only)
TCP 23 (default, can be set)
SMTP TCP 25
DNS forward UDP 53
HTTP TCP 80 (default, can be set)
SNTP UDP 123
SNMP UDP 161 (default, can be set)
H.225 registration, admission, sta-
tus
UDP 1719 (default, can be set)
H.225 signaling TCP 1720 (default, can be set)
Radius UDP 1812 (default, can be set)
Radius accounting UDP 1813 (default, can be set)
GATE Manager
TCP 4445 (default, can be set)
SIP signaling UDP / TCP 5060 (default, can be set)
RTP UDP 29000-29120 (default, can be set)
vGATE Control Unit
TCP 57343
vGATE tunneling TCP 4446
For vGATE Control Unit and iMNP
FTP TCP 21
Telnet TCP 23
MySQL database TCP 3306
iGATE or ECOTEL to vGATE TCP 57342
vGATE tunneling to iGATE or
ECOTEL
TCP 4446