TELES ECOTEL - Page 202

ONLINE TRAFFIC MONITOR
CHAPTER 11
202
ECOTEL 3G 16.1. Revised: 2011.
Sample Failed Log
The example below shows a sample failed log file:
The reason the connection could not be established is specified using DSS1 codes:
91 – (user busy)
ff – call not answered (disconnected by calling party)
When callback with DTMF is configured and no connection is established to the B subscriber, an entry recording
the A subscriber’s connection time is generated in the
failed.log file:
The CDR contains the IP addresses for signaling and voice data. The first IP address is the signaling address and
the second one is the RTP address.The IMSI is written behind the IP addresses if the keyword
IMSI is defined in
the
pabx.cfg:
Example:
In the case of missed-call entries for DLA/Callback calls, duration is the connection time for the first leg.
5
IP logging signaling: RTP
6
Audio codec used
7
Frame size
8
Service indicator (cf. Table 11.1 on page 198 )
9
Cause values
10
Call duration (if the call does not result in an Alerting, the entry will be -1)
11
Number of call attempts
12
Cell ID
13
RSSI
F1,21.04.10-08:19:19,[0001:01]101760,[0002:01]0177566,262024550067835,,,,0101,00,1,1,38922,9
F1,21.04.10-09:33:15,[0001:01]101760,[0002:01]0177566,262024550067835,,,,0101,00,26,1,38922,15
F1,21.04.10-09:43:37,[0001:01]101760,[0002:01]0177566,262024550067835,,,,0101,00,4,1,38922,19
F1,21.04.10-12:45:17,[0001:01]101760,[0002:01]0177566,262024550067835,,,,0101,00,26,1,38922,20
F1,24.11.09-16:39:17,[0006:01]IN,[0008:01]0177566,123456789123456,,,,0101,ff,7,1,34193,11
C1,24.11.09-16:52:20,24.11.09-16:52:22,[0008:01]401419,[0006:01]IN777,262032441017556,172.20.25.103:172.20.25.103,G711a,20,0101,2,10,0,,34193,11
Table 11.3 Failed Log Entries (continued)
Column Description