TELES ECOTEL - Page 230

ADDITIONAL VOIP PARAMETERS
CHAPTER 14
230
ECOTEL 3G 16.1. Revised: 2011.
VoipBrokenDetectionTimeout=<ms>
When this parameter is set, the system recognizes an interruption in the transmission of RTP/RTCP data in
the VoIP connection following the set number of milliseconds (default 0). This parameter is necessary to set
up an IntraSTAR call immediately when the IP connection is disrupted. Bear in mind that
VoipSilenceSuppression=No must appear in the VoIP profile. For a description of IntraSTAR, see
Chapter 8.1  .
VoipAutoRtpAddr=<mode>
Some application scenarios require automatic RTP IP address and port recognition for VoIP calls, for example
if a firewall or NAT changes the IP address of incoming RTP data. Enter
Yes to activate automatic recogni-
tion. When
No is set, RTP packets sources other than those recognized are rejected. Default No.
Table 14.6 Customized Parameters: VoIP Quality (continued)
VoIP Quality Parameters