AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page102of233
+CEDRXS - eDRX setting
<mode>: disable or enable the use of eDRX in the UE. This parameter is
applicable to all specified types of access technology, i.e. the most recent
setting of <mode> will take effect for all specified values of <AcT>.
0 - disable the use of eDRX
1 - enable the use of eDRX
2 - enable the use of eDRX and enable the unsolicited result code
3 - disable the use of eDRX and discard all parameters for eDRX or, if
available, reset to the manufacturer specific default values
If
<mode>=2 and there is a change in the eDRX parameters provided by the
network, the unsolicited result code reports:
+CEDRXP
: <AcT-type>[
,<Requested_eD
RX_value>[,
<NW-
provided_eDRX_value>[,<Paging_time_window>]]]
<AcT-type>: type of access technology.
1 – CAT M1
2 - GSM (A/Gb mode)
3 - UTRAN (Iu mode)
4 - E-UTRAN (WB-S1 mode)
5 - E-UTRAN (NB-S1 mode)
<Requested_eDRX_value>: string type; half a byte in a 4 bit format. The
eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters
information element (see subclause 10.5.5.32 of 3GPP TS 24.008). For the
coding and the value range, see Extended DRX parameters information
element in 3GPP TS 24.008, Table 10.5.5.32/3GPP TS 24.008.
<NW-provided_eDRX_value>: string type; half a byte in a 4 bit format. The
eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters
information element (see subclause 10.5.5.32 of 3GPP TS 24.008). For the
coding and the value range, see Extended DRX parameters information
element in 3GPP TS 24.008 Table 10.5.5.32/3GPP TS 24.008.
<Paging_time_window>: string type; half a byte in a 4 bit format. The
paging time window referes to bit 8 to 5 of octet 3 of the Extended DRX
parameters information element (see subclause 10.5.5.32 of 3GPP TS
24.008). For the coding and the value range, see the Extended DRX
To Next Page
Loading...
