AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page104of233
+CEDRXRDP - eDRX read dynamic parameters
coding and the value range, see Extended DRX parameters information
element in 3GPP TS 24.008 Table 10.5.5.32/3GPP TS 24.008.
<Paging_time_window>: string type; half a byte in a 4 bit format. The
paging time window referes to bit 8 to 5 of octet 3 of the Extended DRX
parameters information element (see subclause 10.5.5.32 of 3GPP TS
24.008). For the coding and the value range, see the Extended DRX
parameters information element in 3GPP TS 24.008 Table 10.5.5.32/3GPP
TS 24.008.
AT+CEDRXRDP=?
Test command returns the supported <mode>s and the value ranges for the
access technology and the requested eDRX value as compound values.
Reference 3GPP TS 27.007
Custom AT Commands
Configuration AT Commands
Manufacturer Identification - #CGMI
#CGMI - Manufacturer Identification
AT#CGMI
Execution command returns the “device manufacturer identification code” with
command echo.
AT#CGMI=?
Test command returns the OK result code.
Example
AT#CGMI
#CGMI: Telit
OK
Model Identification - #CGMM
#CGMM - Model Identification
AT#CGMM
Execution command returns the “device model identification” code with command
echo.
AT#CGMM=?
Test command returns the OK result code.
Example
AT#CGMM
#CGMM:LE920
OK
Revision Identification - #CGMR
To Next Page
Loading...
Need help?
General
