Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page49of233

+CPOL - Preferred Operator List
AT+CPOL=?
Test command returns the whole <index> range supported by the SIM and the range for
the parameter <format>
Reference
3GPP TS 27.007
Selection of preferred PLMN list - +CPLS
+CPLS - Selection of preferred PLMN list +CPLS
AT+CPLS=<list>
Set command select one PLMN selector with Access Technology list in the SIM
card or active application in the UICC (GSM or USIM), that is used by +CPOL
command.
Parameter:
<list>:
0 - User controlled PLMN selector with Access Technology EFPLMNwAcT, if not
found in the SIM/UICC then PLMN preferred list EFPLMNsel (this file is only
available in SIM card or GSM application selected in UICC) (Default)
1 - Operator controlled PLMN selector with Access Technology EFOPLMNwAcT
2 - HPLMN selector with Access Technology EFHPLMNwAcT
AT+CPLS?
Read command returns the selected PLMN selector list from the SIM/USIM
+CPLS: <list>
AT+CPLS=?
Test command returns the whole index range supported listsby the SIM./USIM
Reference
3GPP TS 27.007

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English