AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page129of233
#SERVINFO - Serving Cell Information
running
<GPRS> - GPRS supported in the cell
0 - not supported
1 - supported
The following informations will be present only if GPRS is supported in the cell
<PB-ARFCN> - Not supported by 3GPP. PBCCH ARFCN of the serving cell; it’ll be
printed only if PBCCH is supported by the cell, otherwise the label “hopping” will
be printed
<NOM> - Network Operation Mode
..”I”
“II”
..”III”
<RAC> - Routing Area Color Code
<PAT> - Priority Access Threshold
..0
..3..6
<UARFCN> - UMTS ARFCN of the serving cell
<PSC> - Primary Synchronisation Scrambling Code
<DRX> - Discontinuous reception cycle length
<SD> - Service Domain
0 – No Service
1 – CS Only
2 – PS Only
3 – CS & PS
<RSCP> - Received Signal Code Power in dBm
<EARFCN> - E-UTRA Assigned Radio Channel
<PhysicalCellId> - Physical Cell ID
<TAC> - Tracking Area Code
<RSRP> - Reference Signal Received Power
<URA> - UTRAN Registration Area Identity
Query SIM Status - #QSS
#QSS - Query SIM Status
AT#QSS=
[<mode>]
Set command enables/disables the Query SIM Status unsolicited indication in
the ME.
Parameter:
<mode> - type of notification
0 - disabled (factory default); it’s possible only to query the current SIM
status through Read command AT#QSS?
To Next Page
Loading...
Need help?
General
