AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page206of233
Where:
<NoARFCN> - number of scanned frequencies
<NoBCCH> - number of found BCCh
AT#CSURVF?
Read command reports the current number format, as follows:
#CSURVF: <format>
AT#CSURVF=?
Test command reports the supported range of values for the parameter <format>.
<CR><LF> Removing On Easy Scan® Commands Family -#CSURVNLF
#CSURVNLF - <CR><LF> Removing On Easy Scan® Commands Family
AT#CSURVNLF=
[<value>]
Set command enables/disables the automatic <CR><LF> removing from each
information text line.
Parameter:
<value>
0 - disables <CR><LF> removing; they’ll be present in the information text (factory
default)
1 - remove <CR><LF> from imformation text
AT#CSURVNLF?
Read command reports whether automatic <CR><LF> removing is currently enabled
or not, in the format:
<value>
AT#CSURVNLF=?
Test command reports the range of values for parameter <value>.
Extended network survey - #CSURVEXT
#CSURVEXT - Extended network survey
AT#CSURVEXT
[=<value>]
Set command enables/disables extended network survey.
Parameter:
<value>
0 - disables extended network survey (factory default)
1 - enables extended network survey; all the network survey execution commands
(#CSURV, #CSURVC) display the BAList for every valid scanned BCCh carrier
2 - enables extended network survey; all the network survey execution commands
(#CSURV, #CSURVC) display the BAList for every valid scanned BCCh carrier
and, if GPRS is supported in the cell, they report some GPRS informations carried by
the System Information 13 of the BCCh
3 - enables more extended network survey; all the network survey execution
commands (#CSURV, #CSURVC). It displays transmit power level, receiving level
access min, Cell Reselection Offset, Penalty Time, T3212 Periodic Location Update
Timer and Cell Reselection Offset
To Next Page
Loading...
Need help?
General
