Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page20of233

*(Values in parentheses are 3gpp TS 24.008 cause codes) Message Service Failure Result Code - +CMS ERROR:
<err>
Message Service Failure Result Code -
+CMS ERROR: <err>
This is NOT a command; it is the error response to +Cxxx
3gpp TS 27.005 commands.
Syntax: +CMS ERROR: <err>
Parameter: <err> - numeric error code. The <err> values are reported in the below table:
Numeric Format Meaning
0...127 3gpp TS 24.011 Annex E-2 values
128...255 3gpp TS 23.040 sub clause 9.2.3.22 values
300 ME failure
301 SMS service of ME reserved
302 operation not allowed
303 operation not supported
304 invalid PDU mode parameter
305 invalid text mode parameter
310 SIM not inserted
311 SIM PIN required
312 PH-SIM PIN required
313 SIM failure
314 SIM busy
315 SIM wrong
316 SIM PUK required
317 SIM PIN2 required
318 SIM PUK2 required
320 memory failure
321 invalid memory index
322 memory full
330 SMSC address unknown
331 no network service
332 network time-out
340 no +CNMA acknowledgement expected
500 unknown error

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English