Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page60of233

+CRSM - Restricted SIM Access
AT+CRSM=220,28474,9,4,30,657469FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFF
+CRSM: 144,0
OK
Status, FPLMN(6F7B)
AT+CRSM=242,28539
+CRSM: 144,0,623C820238218410A0000000871002FFFFFFFF8904
0300FFA5118001318103010A3282011E8304000030E08A01058B032F0609C609
9001C0830101830181
Reference
3GPP TS 27.007, 3GPP TS 11.11/51.011
Available AT Commands - +CLAC
+CLAC - Available AT Commands
AT+CLAC
Execution command causes the ME to return the AT commands that are available
for the user, in the following format:
<AT cmd1>[<CR><LF><AT cmd2>[…]]
where:
<AT cmd n > - defines the AT command including the prefix AT
AT+CLAC=?
Test command returns the OK result code
Reference
3GPP TS 27.007
Mobile Equipment Errors
Report Mobile Equipment Error - +CMEE
+CMEE - Report Mobile Equipment Error
AT+CMEE=[<n>]
Set command enables/disables the report of result code:
+CME ERROR: <err>
As an indication of an error relating to the +Cxxx commands issued.
When enabled, device related errors cause the +CME ERROR <err> result code
instead of the default ERROR result code. ERROR anyway returned normally
when the error message related to syntax, invalid parameters, or DTE functionality.

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English