AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14
ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved page202of233
OK
(wcdma)
at#csurv
Network survey started ...
uarfcn: 10812 rxLev: -87 mcc: 450 mnc: 08 scr code: 6528 cellId: 10683976 lac:
5121 cellStatus: CELL_LOW_PRIORITY
uarfcn: 10713 rxLev: -87 mcc: 450 mnc: 05 scr code: 1200 cellId: 2171648 lac:
8209 cellStatus: CELL_LOW_PRIORITY
Network survey ended
OK
Note
1. The command is executed within max. 2 minute.
Network Survey (Numeric Format) - #CSURVC
#CSURVC - Network Survey (Numeric Format)
AT#CSURVC[=
[<s>,<e>]]
Execution command allows to perform a quick survey through channels belonging to
the band selected by last #BND command issue, starting from channel <s> to channel
<e>. Issuing AT#CSURVC<CR>, a full band scan is performed.
Parameters:
<s> - starting channel
<e> - ending channel
After issuing the command the device responds with the string:
Network survey started…
and, after a while, a list of informations, one for each received carrier, is reported, each
of them in the format:
In 2G
(For BCCH-Carrier)
<arfcn>,<bsic>,<rxLev>,<ber>,<mcc>,<mnc>,<lac>,<cellId>,
<cellStatus>,<numArfcn>[,<arfcn
1> ..[ <arfcn64>]]
[,<numChannels>[,<ba
1> ..[<ba32>]][,<pbcch>[,<nom>,<rac>,<
spgc>
<pat> <nco> <t3168> <t3192> <drxmax> <ctrlAck>
<bsCVmax>,<alpha>,<pcMeasCh>]]]
<CR><LF><CR><LF><CR><LF>
where:
<arfcn> - C0 carrier assigned radio channel (BCCH - Broadcast Control Channel).
<bsic> - base station identification code; if #CSURVF last setting is 0. <bsic> is a
decimal number, else it is a 2-digits octal number.
<rxLev> - decimal number; it is the receiption level (in dBm).
<ber> - decimal number; it is the bit error rate (in %).
<mcc> - hexadecimal 3-digits number; it is the mobile country code.
<mnc> - hexadecimal 2-digits number; it is the mobile network code.
To Next Page
Loading...
Need help?
General
