Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page118of233

#PSNT – Packet Service Network Type
AT#PSNT=?
Test command returns the range of supported <mode>s.
Read Current Network Status in 3G Network - #RFSTS
#RFSTS – Read current network Status in 3G network
AT#RFSTS
Read current status in the format
(GSM network)
#RFSTS:
<PLMN>,<ARFCN>,<RSSI>,<LAC>,<RAC>,[<TXPWR>],<MM>,<RR>,<NOM>,<CI
D>,<IMSI>,[<NetNameAsc>],<SD>,<ABND>[CR,LF] [CR,LF]
Parameter GSM Example description
PLMN "450 05" Country code and operator code(MCC, MN
C
ARFCN 114 GSM Assigned Radio Channel
RSSI -67 Received Signal Strength Indication
LAC 2011 Localization Area Code
RAC 11 Routing Area Code
TXPWR 1 Tx Power (In traffic only)
MM 19 Mobility Management
RR 0 Radio Resource
NOM 1 Network Operator Mode
CID 2825220 Cell ID
IMSI "450050203619261" International Mobile Station ID
NetNameAsc "SKTelecom" Operation Name, Quoted string type or “” if
n
name is unknown
SD 3 Service Domain
(0 : No Service, 1 : CS only, 2 : PS only, 3 :
C
ABND 2 Active Band
(1 : GSM 850, 2 : GSM 900, 3 : DCS 1800,
4
1900)
(WCDMA network)
#RFSTS:
<PLMN>,<UARFCN>,<PSC>,<Ec/Io>,<RSCP>,<RSSI>,<LAC>,<RAC>,[<TXPWR>],
<DRX>,<MM>,<RRC>,<NOM>,[<BLER>],<CID>,<IMSI>,[<NetNameAsc>],<SD>,[<
CsAccess>],[<PsAccess>],<nAST>[,<nUARFCN><nPSC>,<nEc/Io>,,,,],<ABND>
[CR,LF] [CR,LF]
Parameter WCDMA Example description

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English