Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page40of233

S5 - Command Line Editing Character
<char> - command line editing character (decimal ASCII)
0..127 - factor
y
default value is 8 (ASCII BS)
ATS5?
Read command returns the current value of S5 parameter.
Note: the format of the numbers in output is always 3 digits, left-filled with 0s
Reference
V25ter


3GPP TS 27.007 AT Commands
General
Request Manufacturer Identification - +CGMI
+CGMI - Request Manufacturer Identification
AT+CGMI Execution command returns the “device manufacturer identification code” without
command echo.
AT+CGMI=?
Test command returns OK result code.
Reference
3GPP TS 27.007
Request Model Identification - +CGMM
+CGMM - Request Model Identification
AT+CGMM
Execution command returns the “device model identification code” without command
echo.
AT+CGMM=?
Test command returns OK result code.
Reference
3GPP TS 27.007
Request Revision Identification - +CGMR
+CGMR - Request Revision Identification
AT+CGMR
Execution command returns “device software revision number” without command
echo.
AT+CGMR=?
Test command returns OK result code.
Reference
3GPP TS 27.007
Request Product Serial Number Identification - +CGSN

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English