Telit Wireless Solutions ME910C1 Series Reference Guide






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page137of233

+CSIM – Generic SIM access
<response> : response to the command passed on by the SIM to the ME in the
format as described in GSM TS 11.11 or 3G TS 31.101 (hexadecimal character
format).
Error case:
+CME ERROR: <err>
possible <err> values (numeric format followed by verbose format):
3 operation not allowed (operation mode is not allowed by the ME, wrong
interface lock/unlock status )
4 operation not supported (wrong format or parameters of the command)
13 SIM failure (SIM no response)
AT+CSIM=?
Test command returns the OK result code.
Example
Lock SIM interface
AT+CSIM=1
OK
2G SIM (TS 11.11):
AT#ENAUSIM?
+ENAUSIM: 0
OK
STATUS
AT+CSIM=10,A0F2000016
+CSIM:48,”000002A87F20020000000000099300220800838A838A9000”
OK
SELECT EF 6F07
AT+CSIM=14,A0A40000026F07
+CSIM: 4,”9F0F”
OK
GET RESPONSE
AT+CSIM=10,A0C000000F
+CSIM: 34,”000000096F0704001A001A010200009000”
OK
SELECT EF 6F30
AT+CSIM=14,A0A40000026F30

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English