Telit Wireless Solutions ME910C1 Series - Page 17






AT Commands Reference Guide
80529ST10815A Rev.2– 2017-09-14

ReproductionforbiddenwithoutTelitCommunicationsS.p.A.writtenauthorization‐AllRightsReserved  page17of233

In case of errors depending on ME operation, ERROR (or 4) response may be replaced by +CME ERROR:
<err> or +CMS ERROR: <err>
.
NOTE: The command line buffer accepts a maximum of 80 characters. If this number is
exceeded none of the commands will be executed and TA returns ERROR.