181
5.1.4.2 Configuration procedure
Step 1 Login to the web UI of V1200, choose Wireless > 2.4G > Basic to enter the configuration
page to set the channel and bandwidth to the same with the upstream router.
Step 2 Choose Wireless > 2.4G > Security to set up the network authentication type and security
key (if required) to the same with the upstream router.
Step 3 Choose Wireless > 2.4G > Wireless Bridge to access the configuration page set up wireless
bridge.
1. Bridge Restrict: Select Enabled(Scan). It displays the available WiFi network list
automatically.
To Next Page
Loading...
