Tenda V1200 - Page 45

35
Step 6 Enter the PPPoE user name and password provided by your ISP, and set other parameters
as required.
Parameter description
Parameter
Description
PPPoE Service Name
If your ISP provides this name, enter it here. Otherwise, leave it blank.
Authentication Method
It specifies the authentication method the ISP-side uses to authenticate the
client. If you do not certain about it, select AUTO.
MAC Clone
If you can only access the internet via a specified computer, it may indicate
that your ISP binds the internet service to the MAC address of the computer
to restrict access. In this case, you need to clone the MAC address of this
computer to the modem router for internet access.
MTU
It specifies the maximum size of packet that the router can transmit. MTU
varies across connection types.