EasyManua.ls Logo

Tenda V1200 - Page 98

Tenda V1200
257 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
The computers in LAN can visit this address to log in to the web UI of the modem router. For
example, if the address is set to 2000::1/64, enter http://[2000::1] in the address bar to access the
web UI.
4.2.3.2 IPv6 LAN Applications
The Modem router supports two IPv6 address auto-configuration types: Stateless Address Auto
Configuration and Stateful Address Auto Configuration. Select one to follow as required.
Stateless address auto configuration
Overview
The computers in LAN only obtain prefix and DNS information from the modem router. The
interface ID is generated based on its MAC address automatically.
Parameter description
Parameter
Description
Enable DHCPv6
Server
It specifies whether to enable the DHCPv6 Server.
Stateless
The computers in LAN only obtain prefix and DNS information from the modem router.
The interface ID is generated based on its MAC address automatically.

Table of Contents

Related product manuals