DRAW Instructions 8–17
82CA5D~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:27 PM Printed: 10/27/05 2:36
PM Page 17 of 20
To display the DRAW STO menu, press y [DRAW] |. When
you select an instruction from the
DRAW STO menu, the
TI-82 STATS returns to the home screen or the program editor.
The picture and graph database instructions are not interactive.
DRAW POINTS STO
1: StorePic Stores the current picture.
2: RecallPic Recalls a saved picture.
3: StoreGDB Stores the current graph database.
4: RecallGDB Recalls a saved graph database.
You can store up to 10 graph pictures, each of which is an
image of the current graph display, in picture variables Pic1
through Pic9, or Pic0. Later, you can superimpose the stored
picture onto a displayed graph from the home screen or a
program.
A picture includes drawn elements, plotted functions, axes, and
tick marks. The picture does not include axes labels, lower and
upper bound indicators, prompts, or cursor coordinates. Any
parts of the display hidden by these items are stored with the
picture.
To store a graph picture, follow these steps.
1. Select
1:StorePic from the DRAW STO menu. StorePic is
pasted to the current cursor location.
2. Enter the number (from
1 to 9, or 0) of the picture variable to
which you want to store the picture. For example, if you
enter
3, the TI-82 STATS will store the picture to Pic3.
Note: You also can select a variable from the PICTURE
secondary menu ( 4). The variable is pasted next to
StorePic.
3. Press Í to display the current graph and store the
picture.
Storing Graph Pictures (Pics)
DRAW STO Menu
Storing a Graph
Picture
To Next Page
Loading...
Need help?
General
