18–4 Memory Management
82D304~1.DOC TI-83 international English Bob Fedorisko Revised: 10/28/05 9:19 AM Printed: 10/28/05 9:21
M Page 4 of 6
Clear Entries clears the contents of the ENTRY (last entry)
storage area (Chapter 1). To clear the
ENTRY storage area,
follow these steps.
1. Press y [
MEM] to display the MEMORY menu.
2. Select 3:Clear Entries to paste the instruction to the home
screen.
3. Press Í to clear the
ENTRY storage area.
To cancel Clear Entries, press ‘.
Note: If you select 3:Clear Entries from within a program, the Clear
Entries
instruction is pasted to the program editor, and the Entry
(last entry) is cleared when the program is executed.
ClrAllLists sets to 0 the dimension of each list in memory.
To clear all elements from all lists, follow these steps.
1. Press y [MEM] to display the MEMORY menu.
2. Select 4:ClrAllLists to paste the instruction to the home
screen.
3. Press Í to set to
0 the dimension of each list in memory.
To cancel ClrAllLists, press ‘.
ClrAllLists does not delete list names from memory, from the
LIST NAMES menu, or from the stat list editor.
Note: If you select 4:ClrAllLists from within a program, the
ClrAllLists instruction is pasted to the program editor. The lists are
cleared when the program is executed.
Clearing Entries and List Elements
Clear Entries
ClrAllLists
To Next Page
Loading...
Need help?
General
