Texas Instruments TI-82 STATS User Manual

Memory Management 18–5
82D304~1.DOC TI-83 international English Bob Fedorisko Revised: 10/28/05 9:19 AM Printed: 10/28/05 9:21
A
M Page 5 of 6
The RESET secondary menu gives you the option of resetting
all memory (including default settings) or resetting the default
settings while preserving other data stored in memory, such as
programs and
Y= functions.
Resetting all memory on the TI-82 STATS restores memory to
the factory settings. It deletes all nonsystem variables and all
programs. It resets all system variables to the default settings.
Tip: Before you reset all memory, consider restoring sufficient
available memory by deleting only selected data (page 18.3).
To reset all memory on the TI-82 STATS, follow these steps.
1. Press y [MEM] to display the MEMORY menu.
2. Select 5:Reset to display the RESET secondary menu.
3. Select 1:All Memory to display the RESET MEMORY tertiary
menu.
4. Read the message below the RESET MEMORY menu.
• To cancel memory reset and return to the home screen,
select
1:No.
• To erase from memory all data and programs, select
2:Reset. All factory defaults are restored. Mem cleared is
displayed on the home screen.
Note: When you clear memory, the contrast sometimes changes. If
the screen is faded or blank, adjust the contrast (Chapter 1).
Resetting the TI-82 STATS
RESET
Secondary Menu
Resetting All
Memory

Texas Instruments TI-82 STATS Specifications

General

Brand	Texas Instruments
Model	TI-82 STATS
Category	Calculator
Language	English