19–8 Communication Link
825A7D~1.DOC TI-83 Intl English, Chap 19 Bob Fedorisko Revised: 10/27/05 1:26 PM Printed: 10/27/05 3:07
PM Page 8 of 10
The only data type you can transmit from a TI-82 STATS to a
TI
-82 is list data stored in L1 through L6.
To transmit to a TI-82 the list data that is stored to
TI-82 STATS lists
L1, L2, L3, L4, L5, or L6, follow these steps.
1. Set the TI-82 to receive (page 19.5).
2. Press y [LINK] 5 on the sending TI-82 STATS to select
5:Lists to TI82. The SELECT screen is displayed.
3. Select each list to transmit.
4. Press ~ to display the LINK TRANSMIT menu.
5. Confirm that the receiving unit is set to receive (page 19.5).
6. Press Í to select 1:Transmit and begin transmitting.
Note: If dimension > 99 for a TI-82 STATS list that is selected to
send, the receiving TI-82 will truncate the list at the ninety-ninth
element during transmission.
Transmitting Lists to a TI-82
Transmitting
Lists to a TI-82
To Next Page
Loading...
