Texas Instruments TI-82 STATS

16–16 Programming
82E978~1.DOC TI-83 international English Bob Fedorisko Revised: 10/26/05 1:47 PM Printed: 10/27/05 3:02
PM Page 16 of 22
To display the PRGM I/O (program input/output) menu, press
 ~ from within the program editor only.
CTL I/O EXEC
1: Input Enters a value or uses the cursor.
2: Prompt Prompts for entry of variable values.
3: Disp Displays text, value, or the home screen.
4: DispGraph Displays the current graph.
5: DispTable Displays the current table.
6: Output( Displays text at a specified position.
7: getKey Checks the keyboard for a keystroke.
8: ClrHome Clears the display.
9: ClrTable Clears the current table.
0: GetCalc( Gets a variable from another TI-82 STATS.
A: Get( Gets a variable from CBL or CBR.
B: Send( Sends a variable to CBL or CBR.
These instructions control input to and output from a program
during execution. They allow you to enter values and display
answers during program execution.
To return to the program editor without selecting an item, press
‘.
Input without a variable displays the current graph. You can
move the free-moving cursor, which updates
X and Y (and R and
q for PolarGC format). The pause indicator is on. Press Í
to resume program execution.
Input
Program Output
PRGM I/O (Input/Output) Instructions
PRGM I/O Menu
Displaying a
Graph with Input